Yamaha CLP-970AM - Manual (Page 75)

Detailed settings for the voices [VOICE SETTINC]
Setting range:
DelayLCR
DelayLR
Echo
CrossDelay
Symphonic
RotarySpeaker
Tremolo
VibeRotor
AutoPan
Phaser
AutoWah
SoundBoardRev
Off
Delay applied at left, center, and right
positions.
Delay applied at left and right posi­
tions.
Echo-like delay
Left and right delays are crossed.
Adds a rich and deep acoustic effect.
Adds the vibrato effect of a rotary
speaker.
The volume level changes in rapid
cycles.
The vibrato effect of a vibraphone.
The sound pans left to right and back
and forth.
The phase changes periodically,
swelling the sound.
The center frequency of the wah filter
changes periodically.
Simulates the reverberation of a
piano soundboard.
No effect.
Setting the variation effect depth
[VariationSend]*
See the procedure on page 66.
2 M
B
- +
NO YES
^ -T
D
n Dual mode:
A B
- +
NainxLa^er Set?-->B NO YES
UariSend(G.Pianol)
m
II
1^ +
C II D
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
Setting the touch sensitivity
[TouchSense]*
This parameter enables determines the manner and
degree to which the volume level changes in response
to your touch on the keyboard (how hard you play).
Since the volume level of the harpsichords and pipe
organs do not change regardless of how you play the
keyboard, the normal setting for these voices is 127.
(See the setting range below.)
See the procedure on page 66.
B
NO YES
D
In Dual mode:
1 A
B
1 - + - 1 +
NainxLa^er Set?-->B
NO YES
TouchSense(G. Pianol) 64■
■ - + 1^ ^
1 C D
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 (softest) - 64 (largest changes in the level) - 127
(loudest and fixed)
Setting the right pedal function
[RPedal]
See the procedure on page 66.
A
■Main
B
NO YES
C
iRPedal SusiainConiB
- ^
D
Setting range:
SustainCont Damper function that sustains the
sound longer as you press the pedal
deeper.
Sustain On/Off switch type damper function.
PitchBend Changes the pitch continuously.
Off No function.
Normal setting:
SustainCount
CLP-970A
75