Yamaha OWNER'S MANUAL HTR-6130 - Manual (Page 12)

Quick start guide
Notes
You must connect a cable TV or a satellite tuner to this unit in
advance. See page 16 for details.
* -
You need to connect the supplied FM and AM antennas to this
unit in advance. See page 19 for details.
You have to tune into the desired radio station. See pages 37 to
39 for the tuning information.
^'4 To achieve the best possible reception, orient the connected
AM loop antenna, or adjust the position of the end of the
indoor FM antenna.
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 24 for details.
■ After using this unit...
Press ©STANDBY/ON on the front panel to set
this unit to the standby mode.
from the standby mode, press ®STANDBY/ON (or
©POWER) on the front panel. See page 19 for details.
Note
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
What do you want to do with this
unit?
Customizing the SCENE templates
Using various SCENE templates
P. 24
Using various input sources
Basic controls of this unit Kir-
p. 29
Enjoying FM/AM radio programs ® P. 37
Using your iPod with this unit Kir-
p. 40
Using the Bluetooth component ® P. 41
Using various sound features
Using various sound field programs
p. 34
Adjusting the parameters of this unit
Optimizing the speaker parameters for your
listening room (BASIC SETUP) isr P. 22
Manually adjusting various parameters of
this unit P. 43
Setting the remote control
rur-
p. 51
Adjusting the advanced parameters
P. 54
Additional features
Automatically turning off this unit
I&-
p. 33
8
En