Using the remote control, Infrared window – Yamaha OWNER'S MANUAL HTR-6130 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
■ Using the remote control
The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
© Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
To set the remote control codes for other components,
see page 53.
Notes
* •
•
Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types
of conditions;
- places of high humidity, such as near a bath
- places of high temperature, such as near a heater or stove
- places of extremely low temperatures
- dusty places
• To set the remote control codes for other components,
see page 53.
21
En