Yamaha OWNER'S MANUAL HTR-6130 - Manual (Page 39)

■ Selecting decoders for 2-channel
sources (surround decode mode)
Signals input from 2-channel sources can also be played
back on multi-channels.
Press 0AMP and then press @SUR. DECODE
repeatedly to select a decoder.
You can select from the following decoders depending on
the type of source you are playing and your personal
preference.
STANDARD Functions
Dolby Pro Logic processing for any
sources
Dolby Pro Logic II processing for
movie sources
Dolby Pro Logic II processing for
music sources
Dolby Pro Logic II processing for
game sources
■ Editing sound fields parameters
You can enjoy good quality sound with the factory default
parameters. Although you do not have to change the initial
settings, you can change some of the parameters to better
suit the input source or your listening room.
1 While listening to a source, press 0AMP
and then press ©A / V to select the desired
parameter.
2 Press ©<!/[> to change the parameter
value.
Note
You cannot change parameter values when "MEM.GUARD” in
"OPTION MENU” is set to "ON” (see page 50).
Sound field programs
Initial settings are indicated in bold under each parameter.
For Pop/Rock, Hall, Jazz, Game, TV Sports,
Movie Spacious and Movie Dramatic:
DSP level
Function:
Choices: Adjusts the effect level.
MIN, MID, MAX
For PRO LOGIC II Music:
Panorama
Function: Sends stereo signals to the surround
speakers as well as the front speakers
for a wraparound effect.
Choices: OFF, ON
Dimension
Function: Gradually adjusts the sound field
either towards the front or towards the
rear.
Control range: -.2 (towards the rear) to -I-.2 (towards
the front), initial setting is STD
(standard).
Center width
Function: Adjusts the center image from all
three front speakers to varying
degrees. A larger value adjusts the
center image towards the front left and
right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center
channel sound is output only from
front left and right speakers), initial
setting is 3 .
or Music Enh. 2ch and Music Enh. 5ch
Effect level
Function: Adjusts the effect level.
Choices: LOW. HIGH
35
En