Connection examples, Basic connections – Yamaha MT3X User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MONITOR OUT L and R Jacks
These jacks deliver a line-level version of the same
signal that appears at the PHONES jack, and thus
the signal can be selected using the PHONES SE
LECT switch. The MONITOR OUT level is con
trolled by the PHONES control. The MONITOR
OUT jacks can be' used to feed a power amp/
speaker system for open-air (i.e. non-headphone)
monitoring.
POWER Switch
Press the POWER switch once to turn power ON, a
second time to turn power OFF.
r NOTE: ------------------------------------------------------
If you are familiar with block diagrams of electronic
equipment, refer to the "BLOCK DIAGRAM” on page
28 for a full overview of the MT3X system.
CONNECTION EXAMPLES
— BASIC CONNECTIONS —
Stereo cassette deck
13
-