Panasonic CT-3268S - Manual (Page 22)

Audio Adjustments
Mode
When Audio is broadcast in Stereo or SAP, an On-Screen
display will appear on initial ‘Turn On” and “Channel
Change”. The available choices will be highlighted.
1. Press (^3).
2. Press ^ or ^ and or ^ to highlight the Audio
Icon.
3. Press 1^3 to display the Audio Adjustment Menu.
4. Press ^ or ^ to highlight MODE.
5. Press ^ or ^ to select STEREO, SAP (Second
Audio Programming), or MONO. The selected mode
will be highlighted.
6. Press ^3) twice to exit menus.
Helpful Hints:
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (such as bilingual
audio, weather reports, etc.).
MONO - Use when stereo signal is weak.
Al Sound (Used in CT-32S21 only)
This feature regulates the volume between programs and
commercial audio to maintain a constant sound output
level.
1. Press
2. Press ^ or^ and or ^ to highlight the Audio
Icon.
3. Press i to display the Audio Adjustment Menu.
-AhSOUND
mmBm sap mono
-------^ON
4. Press ^ or^ to highlight Al SOUND.
5. Press or ^ to select ON or OFF.
6. Press (^3 twice to exit menus.
TV Speakers
This feature is used to turn the internal speakers “ON” or
“OFF. It is used when the TV is connected to an External
Audio Amplifier. (Refer to ‘To Audio Amp Connection”
section for further information.)
1. Press (^3.
2. Press ^ or ^ and or ^ to highlight the Audio
Icon.
3. Press ^3 to display the Audio Adjustment Menu.
n
e a
yd £ri-
WOpE
TV SPEAKERS
SAP MONO
4.
5.
Press A or W to highlight TV SPEAKERS.
Press ^ or ^ to select ON, OFF&VAO or
OFF&FAO.
• ON - TV SPEAKERS operate normally
• OFF&VAO (Variable Audio Output) - TV
SPEAKERS off, the sound output varies
according to the TV volume. Use the TV remote to
control the volume and muting of the External
Amplifier System
• OFF&FAO (Fixed Audio Output) - TV
SPEAKERS off, sound output is not adjustable.
The audio is controlled by the External Amplifier
System volume control
6. Press ' twice to exit menus.
-
22
-