Channel caption, Timer features, Sleep timer – Panasonic CT-3268S User Manual

Page 24: Channel caption timer features, Helpfulhints

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Channel Caption

This feature allows you to enter the call names of up to 30

stations into memory (using up to 4 characters for each
station). The call name will then display along with the

channel number when changing channels or pressing

RECALL.

Channel Caption

I

Station Identifier)

1. Press

2. Press ^ or ^ and ^ or ^ to highlight the Channel

Caption Icon.

3. Press to display the Channel Caption Menu.

CHANNEL CAPTION

ENTER CHANNEL NUMBER

3

ENTER CAPTION

A TO MOVE

▼ CURSOR

4 ► TO SELECT

CHANNEL

Press'^or^.or use the Remote Control Keypad to

enter the channel number you wish to assign a Station

Identifier.

Press ^ to highlight ENTER CAPTION.

Press or ^ to select first character in Station

Identifier. Then press ^ to move cursor to the second

position and repeat until the complete Station Identifier

is entered (up to 4 characters).

Press

A

or

to

highlight

ENTER

CHANNEL

NUMBER. Then repeat steps 4 through 6 to continue
adding Channel Station Identifier(s).

8. Press ^3 twice to exit menus.

NOTE: To delete

a Channel Caption (Station Identifier) from

memory all four character positions in the “ENTER

CAPTION” area must display a dash mark {-).

4.

5.

6

.

7.

Timer Features

Sleep Timer

This feature is used for automatic turn off in 30, 60 or 90

minutes. Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn off. The Recall display will

also appear.

NOTE: This feature will be disabled when Auto Power

On is activated.

1. Press fcssd).

2. Press A or W and ^ or ^ to highlight the Timer

Icon.

3. Press

to display the Timer Control Menu.

Press ^ to select NO, 30, 60 or 90 minutes (Sleep

Timer will be activated).

Press ^3 twice to exit menus.

NOTE: To deactivate

Sleep Timer repeat steps 1 through 4.

In step 4 select “NO” instead of minutes.

4.

5.

Press the RECALL button to display the remaining

minutes for Sleep Timer, the status will display in the
bottom left corner.

HelpfulHints:

When the Maximum amount of station identifiers are
entered, “FULL” will be displayed in the caption

position.

-

24

-

Advertising
This manual is related to the following products: