Connection, Operation, Pip operation with vcr and cable box – Panasonic CT-3268S User Manual
Page 8: Optional equipment connection and operation, Vcr and cable box connection, Cent.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Optional Equipment Connection and Operation
(cent.)
VCR and Cable Box Connection
VCR or VIDEO
DISC PLAYER
CABLE
BOX
TERMINALS ON BACK OF TV
ANTtNPUT I
I
ANT OUTPUT
ÀNTfNPtîT
Incoming Cable
From Antenna or
Cable TV System
(Cables Not Supplied)
Connection
1. Program Remote Control for VCR and Cable Box.
2. Connect incoming Cable to optional cable box ant input.
3. Connect a cable from Cable box ant output to VCR ant input.
4. Connect a cable from VCR ant output to TV ant input.
5. Connect RCA cables from VCR AudioA/ideo output to TV AudioA/ideo input, 1 or 2. Select the same VIDEO Mode that
the equipment is connected to.
Picture in Picture Operation with VCR and Cable Box
This Receiver has the “PICTURE IN PICTURE” feature. For the proper operation of this feature a second video source is
required (such as a VCR). We recommend that you make your antenna and External Video connection as shown below
when a second video source is available.
VCR or VIDEO
DISC PLAYER
TERMINALS ON BACK OF TV
CABLE
BOX
ANT INPUT I
JL
VIDEO out
ANT OUTPUT
ANT OUTPUT
ANT INPUT
Incoming Cable
From Antenna Or
Cable TV System
(Cables Not Supplied)
Operation
1. Press the PIP button to display the PIP frame.
2. Press the TVA/IDEO button to select the desired video mode. Select the same VIDEO Mode that the equipment is
connected to.
3. Turn VCR ON.
NOTE:
PIP video and Main video source will be the same.
4.
Press PLAY button for VCR.
NOTE:
PIP video and Main video source will be from VCR.
5. Press TVA/CR button to display TV video source for Main picture.
- 8 -