Tuning the tv set to the vcr, Connection – Panasonic TC-29V1Z User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Tuning the TV set to the VCR
Connection
1. Connect the external aerial to the RF Input Socket on the VCR.
2. Connect the aerial terminal on the TV set to the RF Output Socket on the VCR with the supplied
DIN-DIN Coaxial Cable.
The adjustments described on this page are not necessary, if the VCR is connected to the TV set
via the Video/Audio output sockets.
1
.
PRE.
Push the “PRE.” (PRESET) Button on the TV set until the on
screen display appears as shown below.
(1) Programme Position Number
(2) Name Write
(3) Band
(4) Tuning bar
2
.
Select the “VCR” position by using “0/VCR” Button on the
Remote Controller.
42
Advertising