Tuning the tv set to the vcr, Helpful hint, Tuning the tv set to the vcr 3 – Panasonic TC-29V1Z User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuning the TV set to the VCR
3.
Push the VCR On/Off Button on the VCR to turn the VCR On.
4.
Set the “Test Signal” Switch to “TEST” position on the VCR.
5.
1
C H —
T U N E
U H F - L
Push the MANU. Down “ ~ ” Button on the TV set, the TV station
broadcasting on the UHF will be automatically tuned and memorized.
Confirm on the TV set that the received test pattern is as shown.
0 1
C H __
1
------ T
U H F
jPanason
i
1
T U N E
J ___
1 " T
0
C H —
T U N E
I
U H F
Note: This test pattern is used on the Panasonic/National VCR only.
6
.
PRE,
Return the TV set to the normal operation mode by pushing this
button 3 times.
7.
Set the “Test Signal” switch to “Off” on the VCR.
The TV is now ready to receive the RF output signal from the VCR.
Helpful Hint
If you want the station name on the screen display together with
programme position, for operation details, refer to the Name Writing
operation on page 44 to 45.
43