Panasonic TC-29V1Z - Manual (Page 69)

General Operation on the Remote Controller
J
Note: Pre-set time may be cancelled in the Ibllowing ways.
1: Set the Pre-set Time condition to “0” using the “Off timer” Button.
2: Turning the TV set off, using the “Power” Button on the Remote
Controller or the “Power” Button on the TV set.
When it will be 3 minutes before the time for switch off, the display of
rest time will begin to flash.
2 .
PNR
a
P - N R O N
Picture Noise Reduction Button.
The Picture Noise Reduction system is a system designed to effectively
reduce the Picture Noise.
The on-screen display will be appeared as follows.
The Picture Noise Reduction is ON condition.
The Picture Noise will be soft.
The Picture Noise Reduction is OFF condition.
The Picture Noise will be sharp.
On the channel of the weak broadcasting signal or no signal, the on­
screen will be Blue back picture and the noise will be muted
automatically.
Note:
When you want to watch the weak broadcasting in spite of the
disturbance, turn the Picture Noise Reduction to ON condition. Then
the TV will be able to receive the weak broadcasting.
69