Panasonic QUICKDRAW MC-V5340 - Manual (Page 6)

TO ASSEMBLE CLEANER
A
WARNING
Electrical Shock Hazard.
Do not plug Into electrical supply until assembly is complete. To do so could result
In electrical shock or Injury.
ATTACHING HANDLE TO VACUUM CLEANER
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has
been installed for
shipping purposes.
Please remove the
screw before inserting
the handle. Insert the
handle as shown in the
illustration. Ensure that the
cord hooks are on the
back side of the handle
before inserting.
Handb
Hole.
Screw
2. Line up the small hole in
the handle with the small
hole in the vacuum cleaner
and insert the screw that
you have removed. Use a
screwdriver to assure the
screw is tightened
Handle
securely. screw
3. There is a recessed area between
the upper cord hook base and the
handle that is designed to secure
the cord during vacuuming.
Always push the power cord
down in this recessed area to help
keep the cord from hanging near
the nozzle and being damaged.
4. Loosely wrap the cord around both
cord hooks. Secure the plug head to
the cord by pushing the cord into the _
retainers on the plug head.
USING THE CORD HOOK
1. The upper cord hook has a
quick-release action. To
release the cord, rotate the
hook downward and the
complete power cord will
drop off the hook for
immediate use.
2. Do not unplug the power cord by
pulling on the cord. Grasp the
plug head and pull to unplug
the vacuum cleaner.
Return the hook to the upright
position before attempting to
rewind the cord.
-
6
-