Armchmënt (fools-on-board) assembur, Attachments, Attachment (tools-on-board) assembly – Panasonic QUICKDRAW MC-V5340 User Manual

Page 7: Caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ArmCHMËNT (fools-on-Board) ASSEMBUr

A

CAUTION

Do not get the

power cord cau^hf

under the agitator when using the vacuum

or

adacft/nenfs.

The attachments should be conveniently positioned on the side of the cleaner for easy access.
Assemble the hose and attachments to the cleaner as follows:

Place the hose on the tool holder in front of the handle. Grasp the end of the hose and push
It down over the wand, twsting as you push down.

Place the wand in the middle slot of the tool holder, twisting and pushing down over the short
hose to assure a good connection.

Place the other extension wand into the front of the tool holder. Store the dusting brush in

the end of the extension wand.

Place the crevice tool into the rear slot of the tool holder.

Refer to the illustration in the Parts Identification section for correct attachment storage.

ATTACHMENTS

r-

Extension

Wands (2)

Dusting—
Brush

Crevice

Tool

3

-

7

-

Advertising