Panasonic AG-527D - Manual (Page 10)

One Time Setup (Continued)
To Change or Re-enter One Time
Setup Items
To Change the OSD Language
1
Push MENU to display the MAIN MENU.
2
Push ^7 <3 E^to select the language selection icon.
3
Push MENU repeatedly to change the language as shown.
4
Push^ V <3E^to select "EXIT,” and then push MENU to exit the
MAIN MENU.
To Replace Channels in Memory (TUNER:ON only)
In case, you have cable installed, etc.
1 Push MENU to display the MAIN MENU.
2
Push A ^7 <3 [> to select “CH,” and then push
MENU to display the SET UP CHANNEL screen.
3
Push A V repeatedly to select ANTENNA
SYSTEM, and then push [>to select your
antenna system (TV or CATV).
4
Push A ”to select AUTO SET, and then push
to start.
• To exit this mode, push MENU.
Then, push A ^7 <3 E>to select “EXIT.”
Now, push MENU to exit the MAIN MENU.
EXIT
SELECT KEY
SET :MENU KEY
--- SET UP CHANNEL ---
AUTO SET
SELECT:* ▼ KEY
SET :► KEY
END :NCNU KEY
To Add or Delete a Channel
(TUNER:ON only)
1 Select a channel using the
NUMBERED keys to add or the
CH,
to delete.
2 Push the ADD/DLT to add or
delete the channel.
• To select a channel once it’s
deleted, use the NUMBERED
keys.
CHANNEL 08 ADDED
10
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1
Push MENU to display the MAIN MENU.
2
Push A ^ ^ 0>to select “CLOCK.” Then, push
MENU to display the SET CLOCK screen.
(Only whenTUNERiON is selected)
3
Push Q V to select “MANUAL SET,” and then
to display the SET CLOCK screen.
4
Please do steps
3
and
4
on page 8.
MAIN MENU
1^1 [
CH CLOCK
SELECT : A ▼ ^ ► KEY
SET ;MENU KEY
SET CLOCK-------- --
DST i ON
ÉìÉÉfflimà .............
SELECT;* ▼ KEY
SET :► KEY
END :MENU KEY
This Combination VCR will accurately maintain its calendar up to
Dec. 31,2089, 11:59PM.
Normal TV or Cable channels are automatically selected and
placed in memory depending on how your Combination VCR is
hooked up.