Panasonic AG-527D - Manual (Page 23)

Hold down STOP for a few seconds to cancel the
Timer Recording.
• Any future daily or weekly recordings will be performed
as programmed.
Cancel a Timer Recording:
(Recording is in progress)
Indicator
Replace Program Contents:
(Recording is not in progress)
1 Do steps 1 and 2 on previous page. All
currently set programs will be displayed
on-screen.
2 Pusho Vrepeatedly to select the
desired timer recording, and then push
E^to display the settings.
(See page 22.)
3 Push A Vrepeatedly to select, and
then push to enter replacement
information.
4 Push PROG three times to exit this
mode and return to the normal TV
screen.
P DT START STOP CH SPD
2 8 10
3 10 8
4 SU 9 00p12:00p125 SLP
OOp 9;00p 10 SP
00p10:00p L SLP
SELECT 1-4;A ▼ KEY
E^fTER :► KEY
END :PROG KEY
START STOP CH
“IV/1 \
SELECT START DATE
SELECT
SET
END A ▼ KEY
■ 4 ► KEY
PROG KEY
Review or Clear Program Contents:
(Recording is not in progress)
а. Do steps 1 and 2 on previous page. All
currently set programs will be displayed
on-screen.
б. Push A Vrepeatedly to select
the desired program number.
c. Push the ADD/DLT to clear the
program.
d. Push PROG twice to exit this mode
and return to the normal TV screen.
P DT START STOP CH SPD
2 8 10:00p12:00p125 SLP
3 10 8:00p 9:00p 10 SP
4 SU 9;00p10:00p L SLP
CANCEL;ADD/DLT KEY
SELECT 1-4:
A t KEY
ETiTER :► KEY
END rPROG KEY
P DT START STOP CH SPD □
-------- : ------------- _ _ _ _
2 8 10: OOp 12:OOp 125 SLP
3 10 8:00p 9:00p 10 SP
4 SU 9:00pl0;00p L SLP
SELECT 1-4: A T
EMTER :► KEY
END : PROG KEY
KEY
If "PLEASE PREPARE FOR TIMER REG" appears and/or the PROGRAM TIMER indicator flashes, check that a
cassette with record tab is loaded and the Combination VCR is in Stop mode.
If the start times of two programs overlap, the lower numbered program will have priority.
If the start time for a Timer Recording comes up during a normal recording, One Touch Recording (page 18) or Timer
Playback, the Timer Recording will not be performed.
If there is a power interruption of more than one minute, the recording may not be performed or continue.
If “INCOMPLETE” appears after all items have been set, check all entries and make necessary corrections.
23