Panasonic AG-527D - Manual (Page 9)

I\X Check list before you begin.
□ Your Combination VCR is connected to an
Antenna, or Cable system (see page 5).
Set up Channel and Auto Clock Set
(TUNERiON only)
@ Important: If you use a cable box, turn it on and select
^ PBS station In your time zone.
* Push QorVto display Channel Auto Set
or screen.
• •
{^3
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE 1T TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
^ Push A to start Channel
“ Auto Set.
These on-screen displays will appear
in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
To Use the Auto Clock Set Feature
When “AUTO SET’ is selected in the steps below, the CHANNEL/CLOCK
AUTO SET screen appears. If Channel Auto Set has already been
completed in the above steps, only Auto Clock Set will be performed.
1 Push MENU to display the MAIN
MENU.
2 Push A V ^ to select “CLOCK.”
Then, push MENU to display the
SET CLOCK screen.
3 Push ci V to select “AUTO SET,”
and then to start Channel Auto
Set and Clock Auto Set.
These on-screen displays will appear
in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
............ SET CLOCK ------------ —
MANUAL SET
SELECT :A ▼ KEY
SET > KEY
END :MENU KEY
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX,TUNE IT TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
If AUTO CLOCK SET IS INCOMPLETE appears, please set the
clock manually.
a. Push MENU to display the SET CLOCK screen.
b. Do steps 3 and 4 on previous page.
Auto clock set will be periomned when the Combination VCR is
turned off the first time each day. If you use a cable box and you
want auto clock set to be performed, the cable box must be left on
and tuned to the PBS channel at the time the Combination VCR
power is turned off.
If for any reason the time is changed manually, automatic time
correction will not occur.