Panasonic AGEP50 - Manual (Page 6)

Connection
When Printing Pictures from a VCR etc. That Are
Played Back on a TV Equipped with Video Input
Jacks
•For safety reasons, turn off the power of all units before connecting.
•Select [VIDEO] or [S-VIDEO] for [INPUT] in the Menu Mode according to the type of video input
jack to which the connection is made. (p. 16)
•When connecting to one of the Video Input Jacks on the Front Panel, selecting [VIDEO] or
[S-VIDEO] for the connection on the Rear Panel is not possible, because the connection on the
Front Panel has priority. To select the desired connection on the Rear Panel, disconnect the Video
Cable from the Front Panel.
Connections O, @ and o (Using 2 Video Cables)
Please purchase a suitable Video Cables for connections @ and o, as these cables are not supplied.
<Hint>
When both the VCR and TV are equipped with S-Video Jacks,
Use connections 0, 0 ^nd 0 (Using 2 S-Video Cables)
Please purchase suitable S-Video Cables for connections O and 0, as these cables are not
supplied.
To Video Inout Jack TV (optional)
[Rear]
ir
Video Output Jack
V
Video Input Jack
Video Cable (optional) 0
To Video Output Jack
Video Cable (optional)
S-Video Cable (optional)
To S-Video Input Jack
Power Socket
S-Video Output Jack
S-Video Input Jack
S-Video Cable (optional)
To S-Video Output Jack
1
Power Cable (supplied)
ll— ,
J
o o o o
OO
y
(
_____________ _
L ^
To AC Power Outlet
(AC 120 V 50/60 Hz)
VCR or other Video Equipment (optional)
When the Color Video Printer’s power is off, the picture signal input through the S-Video Input
Jack is output only through the S-Video Output Jack, and the picture signal input through the
Video Input Jack is output only through the Video Output Jack. In both cases, the corresponding
Video Input Jack on the Front Panel has priority. The selection of the Input Jack made in the Menu
Mode has no effect when the power is off.