Memory scan, Press the memory scan button, Last station recall – Panasonic RQ-V180 User Manual
Page 12: Set the function selector to “iof^ tape, Press the playback button, and playback will begin, Adjust the volume control, Tape playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Memory scan
Once the stations have been preset into the
memory select button for channels 1 through 6,
the programs of each of those stations can be
heard for several seconds in turn simply by
pressing the memory scan button. This function
comes in handy for checking out what kind of
broadcasts are now being beamed by the preset
stations.
1. Press the memory scan button.
(For more than 1 second.)
The channel will change in order 1->2—>
>6—j-l—>to each broadcasting for
about a few seconds, (display flashes)
2. When your desired memory channel is
displayed^ press the memory scan button
once again.
Last station recall
This memory functions when the radio is off.
When the radio is turned on, the frequency
received before it was turned off is tuned in again.
TAPE PLAYBACK
1. Open the cassette compartment cover with
your hand. Insert a cassette as shown In
the figure, and then close the cassette
compartment cover. (^[|D
2. Connect the included stereo earphones
to the headphones jack.
3. Set the function selector to “I
of
^ TAPE”.
4. Press the playback button, and playback
will begin.
5. Adjust the volume control.
•To stop the playback, press the stop button.
Notes:
•Do
not
open
the
cassette
compartment
cover during playback.
•If you set the function selector to “RADIO”
during playback, the playback button wilt not
be released although the motor has stopped.
Press the stop button to release the play
back button.
- 1 2