Panasonic RQ-V180 - Manual (Page 8)

POWER SOURCE (^^0)
•Battery removal
Press battery toward the 0 battery terminal
and remove it.
•Battery life
When the batteries are weak, the OPR/BATT
(operalion/batlery
check) indicator will become
dim or turn off during operation, and this unit will
turn off to protecting the memorized contents.
Replace the new batteries. When replacing the
batteries, replace them within 30 seconds. (If not,
memorized contents will cancelled.)
When the power is turned off soon after increas­
ing the volume, pressing the operation button or
turning on the radio, replace the batteries.
•AC Power Operation { m 0)
Connect the AC adaptor (Use only Panasonic AC
adaptor, RP-AC33, optional) as shown in the
figure.
Note:
To operate on battery power unplug the AC
adaptor unit from the household AC power outlet
and the DC input jack on the unit.
•If you leave the AC adaptor jack connected to
the DC input jack while disconnecting the AC
adaptor unit from the AC power outlet, the
memorized contents for radio will be cleared.
•When the Battery Indicator dims and you wish
to use the AC adaptor, be sure to connect the
AC adaptor after removing the spent batteries.
To Prevent Possible Damage to this Unit
•Load new battery with their polarities (0 and
0) aligned correctly.
•Do not apply heat to batteries, or internal
shortcircuit may occur.
•If this unit is not to be used for a long period
of time, or used on AC power source,
remove the batteries and store them in a
cool and dry place.
•Remove spent batteries immediately,
•Do not use old and new batteries together.
Also never use an alkaline battery with a
manganese battery.
8 -