Pip operation with a vcr - no cable box, Procedure – Panasonic PT 51G44 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
I
n
P
icture
(P\P) O
peration
PIP Operation with a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is
required to provide a second picture.
Connect your television to a VCR, as sho\wn.
TERMINALS OM BACK OF TV
(may vary)
Note:
The remote control must be programmed with the supplied codes to operate the VCR.
See Programming the Remote Control in the Remote Control Quick Reference
Guide.
Procedure
Turn the VCR OFF and tune the PTV to channel 3,
Press the PIP button on the remote control to display the PIP frame on screen.
Note:
Initially, the PIP picture is the same as the Main Picture.
•
Press the TV/VIDEO button on the remote control to select the VIDEO PIP
source.
•
Press the VCR button on the remote control and turn ON the VCR.
•
Press the TV/VCR button on the remote control.
•
Choose channels for P/P frame by pressing VCR CHANNEL up/down buttons on
the remote control.
•
Choose channels for the Main Picture by pressing the TV button on the remote
control and using the numeric keypad or CH up/down buttons.
The
SWAP button switches the PIP and Main
Picture source. Press the
RECALL button for
onscreen PIP and Main Picture source status.