Panasonic PV-GS39 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

'1 h 4C mi

1

irdiCc'-TrS, 1 I'oi.'' nrd ¿f: inni,:6s

Ba::ftCGR-D,.,Co iPV-GS2fr^V-GS3S,'^V-GS'Ti:
U.S.A.) or CGA-DU12 (PV-GS59 Canada) is

supplied.
The times shown in the table are approximate
times. The numbers indicate the recording time

when the Viewfinder is used. The numbers in

parentheses indicate the recording time when the
LCD Monitor is used. In actual use, the available
recording time may be shorter.

The times shown in the table are for continuous

recording at a temperature of 25 °C (77 °F) and
humidity of 60 %. If the Battery is charged at a
higher or lower temperature, the charging time may
be longer.

We recommend the Battery Pack CGA-DLI12 and

CGA-DU21 for long time recording (2 hours or

more for continuous recording, 1 hour or more for
intermittent recording.)

The available recording time becomes shorter

if you use both of Viewfinder and LCD Monitor

simultaneously when rotating the LCD Monitor

forward to record yourself.

The batteries heat up after use or charging. The
Camcorder being used will also heat up. This is

normal.

Along with the reduction of the battery capacity,

the display will change:

^

^

^

1

=^ ^ 4=1. If the battery discharges, then '

(■i=^) will flash.

1

Detach the end of the Grip Belt.

Sill?

2

Remove the Sensor tag. Then, replace the

Grip

Belt.

Adjust the length of the Grip Belt to the size of your

hand.

1

Detach the end of the Grip Belt.

o

S
c

S5.

lO

2

Adjust

the length of the Grip Beit to the

size

of your hand.

3

Reattach

the Grip Belt.

To protect the Lens surface, attach the Lens Cap.

• The Lens Cap and Lens Cap Cord come

preattached to the Grip Belt.

Pass

one

end of the Lens

Cap

Cord

through

the attached eye on the

Lens

Cap.

Then

pass

the Lens Cap through

the

loop

made by itself and pull tight.

»

V

17

Advertising