Panasonic PV-GS39 - Manual (Page 55)

wm.
Player:
3
Press the ► ] Button to start playback.
!pi -iliWsI I
k W J
REW PLAY FF I
Cis) I
STILL ADV =‘„E STILL ADV I
msi
'.V l»° A :
STOP ■
VER
Recorder:
4
Set [ S ADVANCED] » [ * *i> REC STD BY]
» [YES], then move the Joystick Control
[A] to select [*.ii].
Or, while pressing the [• REC] Button,
press the [►] Button on the Remote
Control. (PV-GS59 Only)
• Recording starts.
I To Cancel the Standby for Recording
When the Camcorder is on standby for recording,
move the Joystick Control [T] and select the [■ ]
or press the [ ■ ] Button on the Remote Control.
I To Stop Dubbing
Press the [ ii ] Button or the [ ■ ] Button, or move
the Joystick Control [A] to select [ ] again.
CAUTION;
Unauthorized exchanging and/or copying
of copyrighted recordings may be copyright
infringement.
Notes:
• Do not plug or unplug the DV Cable during
dubbing, or the dubbing may not be completed
properly.
• If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select the
desired sound by [ y SETUP] » [ Jt AUDIO OUT]
on playback.
• Regardless of the menu settings on the recorder,
digital dubbing is carried out in the same mode as
the [
¡s AUDIO REC] mode of the playback tape.
• The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
• Even if you use a device equipped with DV
Terminals such as IEEE1394, you may not be able
to perform Digital Dubbing in some cases. For more
information, see the instructions for equipment
connected.
Date or other information to be displayed cannot
be displayed if the software of the connected
equipment does not support the display function.
While pictures are input from the DV terminal, the
One-Touch Navigation icon blinks on instead of
appearing from the side of the screen when you
press the center of the Joystick Control.
While pictures are input from the DV terminal, the
TV aspect will not change even if you change the
setting for [ B TV ASPECT] in the [ %\ SETUP]
menu.
A video dip can be transferred directly to your PC
(Personal Computer) via a DV Interface Cable
(Optional) using products and software from a
number of video editing software companies.
Using products from video editing software
companies allows you to capture and edit video dips
using the DV Interface.
Our DVC being OHCI compliant should
have no problem working with any OHCI
compliant Firewire Card/video - Editing
software package.
Personal Computer must be equipped with an DV
Terminal.
During Camcorder playback, do not disconnect the
DV Interface Cable or turn the Camcorder off as
this may cause a PC hang-up error.
1394 (¡.LINK) Interface must conform to OHCI
(Open Host Controller Interface Specification).
m
a.
ptf»
5’
a
55