Panasonic PV-GS39 - Manual (Page 38)

This function allows you to record color images
brightly in a dark place without using the Video Light.
• Set to Tape Recording Mode.
1
Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2
Move the Joystick Control [▼] until the
page with ] indication is displayed.
[Oiie-Toudi Navisation icon]
Move the Joystick Control [A] to select
[^1-
• The [MAGICPIX ON] is displayed. The [ • *> ]
Indication flashes and then is displayed.
4
Move the Joystick Control
[-<]
or
[►]
to
adjust.
■ To Cancel the MagicPix Function
Move the Joystick Control
[A]
to select [ *J j
again.
• The [MAGICPIX OFF] is displayed.
Notes:
• If set in a bright place, the screen may become
whitish for a while.
< The MagicPix Function is canceled when you
operate the [OFF/ON] Switch or the Mode Dial.
• In a dark place, the recorded picture is presented in
a time-lapse-like manner.
• Adjust the Focus manually.
• White Balance cannot be set.
• The Shutter Speed cannot be adjusted.
• The Scene Mode cannot be set.
• When recording with the MagicPix Function, it is
recommended that you use a tripod.
• The MagicPix Function makes the signal charging
time of CCD longer up to approx. 30x longer than
usual, so that dark scenes that are invisible to
the naked eyes can be recorded brightly. For this
reason, bright dots may be seen, but this is not a
malfunction.
• The Image Stabilizer Function does not work. In
this case, the [ ieisl ] Indication flashes.
• The Backlight Compensation Function cannot be
changed.
This enables you to record skin colors in a softer tone.
In order to get the best result, avoid background colors
similar to the skin color of the subject. Otherwise, this
may result in a softer background lacking in detail.
• Set to Tape/Card Recording Mode.
1
Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2
Move the Joystick Control [▼] until the
page with [ ® ] indication is displayed.
[Oiie-Touch NavLgaTion icon]
Move the Joystick Control [◄] to select
[ ® ] .
• The [SCFT SKIN MODE ON] is displayed. The
[ ® ] Indication flashes and then is displayed.
• To obtain the best effect, we recommend framing
the subject as shown above in the picture.
■ To Cancel the Soft-Skin Mode
Move the Joystick Control [-#] to select [ ®]
again.
• The [SOFT SKIN MODE OFF] is displayed.
Notes:
• If the background or anything else in the scene
has colors similar to the skin color, they will also be
smoothed.
• If the brightness is insufficient, the effect may not
be clear.
38