Panasonic CSXC181KP - Manual (Page 10)

How to Operate
Auto Restart Control.
If there is a power failure, operation will be
automatically restarted after 3 minutes when the
power is resumed with previous operation mode
and airflow direction.
(When the operation is not stopped by remote
control.)
If you intend not to continue the operation when
the power is resumed, switch off the power
switch at main unit or power supply.
When you switch on the power switch, the
operation will be automatically restarted
with previous operation mode and airflow
direction.
Note: 1. If you do not require Auto Restart
Control, please consult your dealer.
2. Auto Restart Control is not available
when Timer or Sleep Mode is set.
Recommended temperature for health
and comfort.
For Cooling ; 26“C - 28X
For Soft Dry : 1®C - 2°C lower than
room temperature.
<Operation Details>
AUTO - Automatic Operation.
■ Once the Automatic Operation is selected, the in­
door temperature sensor operates automatically
to select the desired operation mode with Cooling
or Soft Dry.
COOLING
Temp, set at
25°C
SOFT DRY
Temp, set at
22“C
DRY - Soft Dry Operation.
■ Soft Dry is a very gentle Cooling Operation
consisting primarily of dehumidifying. It does not
lower the room temperature very much.
Cooling Operation
until room tem­
perature reaches
the setting temper­
ature
Operation will be switch­
ed on and oti for up to
10 min on arxJ 6 min oft
during Soft Dry
Super Low air­
flow amount
J
Setting
Temperature
è
When room temperature reaches the setting tempera-
ture, operation will switch to Soft Dry.
► 9