Test run button, Auto operation button, To set auto operation – Panasonic CSXC181KP User Manual
Page 15: Confirm the power switch is at “i” (on), Press auto operation button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Test Run Button.
(Use when installing and moving)
Auto Operation Button.
■ When the remote control cannot be
used, press Auto Operation Button to run
Automatic Operation.
(Airflow direction setting will be automatic.)
To set Auto Operation.
■ Confirm the power switch is at “I” (ON).
Press Auto Operation Button.
(The operation indication lamp will blink for 20
seconds, and then light up)
• If the button is pressed once more, the
air conditioner will stop.
(The operation indication lamp will switch
off.)
The Remote Control Signal receiving sound can be omitted as desired.
To switch OFF the signal receiving sound, press Auto Operation Button for 10 seconds or more. At the
same time, Automatic Operation starts.
(To switch ON, press Auto Operation Button once more for 10 seconds or more.)
14 ◄