Panasonic Panafax UF-311 - Manual (Page 23)

Howto Set Your LOGO When you transmit a document, a header (LOGO, date, time and page
number) appear on the top of each copy printed out at the other
station.
The LOGO helps identify you to someone who receives your
document. To set your LOGO (max. 25 characters), enter a two-digit
code corresponding to the Character Code Table on page 8-3.
SET
Enter each letter (max. 25 characters),
number and/or symbol in your LOGO
using the keypad to enter each two-
digit code and followed by the SET key
(#).
EX: AB C D E F
[10#11 #SPACE12#13#14#15#1
• Symbol "o" appears when you enter
a two-digit code for each chararter.
• The SPACE key can be used to enter
a space instead of entering 72.
If you make a mistake, use the
<(ORIGINAL)and > (RESOLUTION)
keys to move the cursor to the
incorrect character and re-enter the
new character over it.
If more than 13 characters are entered,
the first part of characters will scroll
off the display.
00 0000
To set the LOGO,
^ START
NOTE
1. You can print out the Chara cter
Code Table (see page 6-7).
2. If you wish to confirm the entered
ID number, print out a Journal and
check the bottom line
(see page 6-1).