Recording paper specification – Panasonic Panafax UF-311 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Image Memory Capacity
Power Supply
Power Consumption
Dimensions
Weight
Operating Environment
<BaseMemory>
Approx. 12 pages
< Option Memory >
M n ; Base memory plus Approx. 30 pages
MM : Base memory plus Approx. 60 pages
MW : Base memory plus Approx. 120 pages
(Based on CCITTTest Chart No.1 using
Standard Resolution.)
180 - 264 VAQ47 - 63Hz, Single Phase
Standby
: Approx. 13W
Transmission : Approx. 25W
Reception
; Approx. 23W
Copy
: Approx. 34W
452 mm(W) x 380 mm(D) x 230 mm(H)
(excluding projections)
Approx. 11 Kg
(excluding Recording Paper)
Temperature
Relative Humidity
:41 to95“F(5to35"C)
:
20
to 80%
8.2.
RECORDING PAPER
SPECIFICATION
NOTE
tt is possible that paper could
meet all of the specifications
listed in this table and still not
print well because of the
variations in paper
manufacturing. Therefore, we
recommend
that you
teif paper
thoroughly before purchasing.
In general, most bond papers will produce excellent results. Most photocopy
papers will also work very well. There are many "name" and "generic"
brands of paper available. We recommend that you test various papers until
you obtain the results you are looking for.
The following table summarizes the major specifications to consider when
selecting white or colored paper.
Basic Weight
60 to 90 g/m2
Cut Edge Conditions
Cut with sharp blades with no visible frayed
edges
Finishing Dimensions
± 0.8mm of nominal, corners 90® ± 0.2®
Grain
Long grain
Moisture Content
4% to
6
% by weight
Opacity
84% minimum
Packing
Poiyiaminated moisture-proof ream wrap
Sizes
A4 ; 210mm
X
297mm
Letter : 216mm x 280mm
Legal : 216mm x 356mm
Type
Cut sheet
Wax Pick
304.8mm minimum (Dennison)