Speaker system connection, Detaching the speakers – Panasonic RX-DT670 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPEAKER SYSTEM CONNECTION
This unit can be used as a one-piece portable stereo radio cassette recorder, or a three-piece component system, by attaching or
detaching the speaker system.
•Before attaching or detaching the speakers, be sure to disconnect the speaker cables from the speaker terminals.
•Be sure to press the operation switch to turn off the unit before connecting/disconnecting the speaker cables.
■ Attaching the speakers
1. Align the speaker with the main unit as shown in the
figure, interlock the grooves and press down.
2. Connect the colored speaker cables to the same colored
speaker terminals.
■ Detaching the speakers
1. Unlock the speaker release levers by pulling them in the
direction shown below, and slide up each speaker.
2. Connect the speaker cables to the speaker terminals.
When using the unit with the speakers attached, wind
the speaker cables as shown.
Note:
Since a strong magnet is used for the speaker, keep
magnetized commuter passes, tickets or personal
credit cards, recorded tapes, watches, etc. away
from the set. The speaker magnet in the set may
damage them.
11