Panasonic GP-MS112 - Manual (Page 6)

PREPARATIONS
Caution;
Keep the Power ON/OPF switch of the camera in
the OFF position throughout the installation.
• GP-MS112 With GP-LM3T,GP-LM7R5TA,
GP-LM15T orGP-LP12T
1. Remove the front cap of the camera head and confirm
that the surface of the optical filter of the camera head
is clean.
• GP-MS112 with GP-AD22Tand Optional
C-mount Lens
1, Remove the front cap of the camera head and confirm
that the surface of the optical filter of the camera head
is clean.
Front Cap
(TDii-
Ront Cap
(ED#
If the surface of the optical filter is dirty or dusts are
on it, clean it up with a blower brush which is for film
camera lenses (may be available at your local camera
store) or supplied lens cleaning tissure paper.
2. Rotate the focus lock ring fully clockwise (1). Mount
the Pinhole Lens or Wide-angle Lens to the camera by
rotating it clockwise slowly (2).
2.
If the surface of the optical filter is dirty or dusts are
on it, clean it up with a blower brush which is for film
camera tenses (may be available at your local camera
store) or supplied lens cleaning tissure paper.
Attach the optional C-mount lens to the C-mount
adaptor GP-AD22 by rotating it clockwise.
( 2 ) \
Focus Lock Ring
GP-LP12T
GP-LM3T
R)cus Lock Ring
GP-LM15T
3. Rotate the focus lock ring fully clockwise (1).
Mount the lens and C-mount adaptor by rotating them
clockwise slowly (2).
Focus Lock Ring
Caution:
If the optional C-mount lens size exceeds 2" (50.8
mm) in diameter, 2-3/4" (70 mm) in length and 0.66
lbs (300g) in weight, both the camera and lens
should be secured.
Focus Lock Ring
GP-LM7R5TA Focus Lock Ring
- 5 -