Panasonic GP-MS112 - Manual (Page 9)

SPECIFICATIONS
Pick-up Device :
Horizontal Resolution :
Minimum Scene Illumination :
Signal to Noise Ratio :
Video Output ;
Scanning System :
Synchronization :
Gain Control :
Controls :
Power Source :
Maximum Camera Cable Length
Ambient Temperature ;
Dimensions
Camera Head :
Camera Control Unit :
Weight
Camera Head ;
Camera Control Unit :
1/2-inch Interline transfer CCD image sensor with 682(H) x 492(V) pixels
500 lines
0.07 footcandles (0.7 lux) (F1.4 with AGC ON and +6 dB ON, more than 10 IRE of
Y signal with set up)
46 dB
1.0Vp-p/75 ohms, composite video, BNC connector x 1
2:1 Interlace
Internal/Exterrial (Composite/VS or HD & VD)
AGC ON (+9dB)/OFF Switch, Gain (0/+6 dB)/Switch
PED LEVEL, Horizontal phase (H PHASE)
12V DC, 350 mA
99 feet (30 meters)
14°F - 104“F (-10°C -+40°C)
2/3" (Diameter) x 1-1/2" (D), (17(Diameter) x 36.8 (D) mm)
4-11/16" (W)x 1-7/16’ (H)x 6-1/8" (D)
(120(W)x 36(H) X 157(D) mm)
0.04 lbs (16g)
1.6 lbs (700g)
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
STANDARD CONFIGURATION
o Camera Head
o Tripod Attachment
o Camera Control Unit
OPTIONAL ACCESSORIES
o Camera Cable
GP-CA44
GP-CA45
GP-CA46
GP-CA49:
6.6 feet (2 meters)
16.5 feet (5 meters)
33.0 feet (10 meters)
99.0 feet (30 meters)
C-mount Adaptor GP-AD22T
Wide-angle Lens GP-LM3T or GP-LM7R5TA
Pinhole Lens GP-LP12T
Telephoto Lens GP-LM15T
- 8 -