Copying your tapes (dubbing), Caution – Panasonic PV-M2036 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Copying Your Tapes (Dubbing)
Connections you’ll need to make.
Recording (Editing)
Combination VCR
1
Insert a pre-recorded tape
into the Playing (source) VCR.
Insert a blank tape with record
tab into the Recording (editing)
Combination VCR.
Caution:
Unauthorized exchanging and/
or copying of copyrighted
recordings may be copyright
infringement.___________________
)
Select “LINE” as the input on the
Recording Combination VCR.
• If you are using this Combination VCR as
the Recording unit, see “Selecting the Input
Mode” section on page 15.
Push PLAY on the playing VCR.
Then, push PAUSE when the
tape reaches the point you want
to start copying.
Push REC and PLAY at the same
time on the recording Combination
VCR. Then, push PAUSE on the
remote immediately.
Push PAUSE on both units (at the
same time), to begin copying.
Edit Out Unwanted Parts of the original recording by using the
PAUSE button (on the Recording unit) while copying is in progress.
^ \ Then, push STOP on both units to
i ) stop copying.
19