Panasonic DVD-RV21 - Manual (Page 31)

Picture
Picture distorted during search. •The picture will be somewhat distorted at times: This is normal.
No picture. • Ensure that the equipment is connected properly. 0
• Make sure the television is on.
• Ensure the television’s video input setting (e.g.. VIDEO 1) is correct.
The picture shown on the
television is not normal.
(The sides of the picture are cut
off or black bands appear at the
top and bottom of the screen.) • Go to the Video menu in the ACTION screen, and change “TV Aspecf to suit your television.
You may also need to change the screen mode on the television itself. ©
• Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
Displays
“NO PLAY” appears on the unit’s
display. • You inserted a disc the unit cannot play; insert one it can. 0
No on-screen display. • Go to the Display menu in the ACTION screen, and select “On” for “On-Screen Messages”. ©
On-Screen Menu Icons not
displayed or only partially
displayed on the television. • Press [ A , T ] while the rightmost icon is highlighted to move them down. (D
The disc’s menu is displayed in a
different language. • Go to the Disc menu in the ACTION screen, and select the preferred language for “Menus". ©
No menu play. • Menus are only displayed if they are recorded on the disc.
“CHECK THE DISC" appears on
the unit’s display. • Disc is dirty. W/ipe the disc clean. 0
“HDD” appears on the unit's
display.
□□ stands for a number.
•Trouble is likely to have occurred. The number following “H" depends on the status of the unit.
Reset procedure:
Press [POWER
c ! j /I] to switch the unit to the standby mode and then back to ON. Alternatively,
press [POWER (!)/!] to switch the unit to the standby mode, disconnect the AC power supply
cord, and then reconnect it.
• If the service numbers fail to clear, note the service number and contact a qualified service
person.
“NO DISC” appears on the unit’s
display. •You haven't inserted a disc; insert one.
•You haven’t inserted the disc correctly; insert it correctly.
8
I
(U
•is
oc
Do not atlempl to remove the cover(s) or repair the unit yourself. Reler servicing to qualified personnel only.
Product information
For product service, product information or assistance with product operation, refer to the servicenter directory.
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dampened with a soap and water solution or a weak detergent solution.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.