Panasonic TC 42P1F - Manual (Page 18)

ASPECT Controls
The Wide Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen “cinema
format" picture.
1
ASPECT-AUTO ASPECT-AUTO Button (Panasonic Auto)
Press the ASPECT-AUTO button to switch to
Panasonic Auto mode. The display will
automatically become enlarged.
For an elongated image Image is expanded
Changes in accordance with the
Panasonic Auto mode setting.
{Refer to page 28.)
Note:
(1) If an S1 signal is detected while Panasonic Auto mode is
active, the aspect mode will change to “16:9”.
(2) If a 525p or 1080i signal is input during Component input
signal mode and during RGB and PC input signal mode
the controls will not operate.
2
MANUAL-ASPECT ASPECT-MANUAL button
The aspect mode changes each time the
ASPECT-MANUAL button is pressed.
r> 4:3 —> Zoomi
Just f-
2oom2
16:9 <-
Note:
(1) During RGB and PC input signal mode, the mode switches
between “4:3” and “16:9” only.
(2) For a 525p (480p) signal input during “Component” input
signal mode, the mode switches between "Zoomi” and
“16:9” only.
(3) When an SI signal is being received during “S-Video” input
signal mode, the mode is set to “16:9” mode.
(4) When a 1080i signal is being received, the mode is set to
“16:9” mode, and switching is not possible.
(5) The aspect mode is memorised separately for different
input signal formats (NTSC/PAL/SECAM, 525p, RGB and
PC). (525p includes 525i and 625i signals.)
18