Picture p0s./s1ze controls, During “rgb” and “pc” input signal modes, Mode – Panasonic TC 42P1F User Manual
Page 21: Picture, H-pos, V-pos, H-size, V-size, Clock, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PICTURE P0S./S1ZE Controls
During “RGB” and “PC” input signal modes
Choose the option and adjust by pushing the Position
Up
“A”
or Down
“T”
buttons, and by setting with the
Position Left or Right buttons.
c=i> 33 CE
Picture Pos./Size
CB D
a: o
CB-Ad(utt
S»ltel-e] o
v-pos
H-SiZ0
V-sizB
Clock Phase
PICTUflE
POS.'SIZE
I i&il
Mode
Picture
H-pos
When the Position Left button is pressed
When the Position Right button is pressed
V-pos
When the Position Left button is pressed
When the Position Right button is pressed
i
!i
l!
a
:
t
H-size
V-size
When the Position Left button is pressed
When the Position Right button is pressed
.
A
c
When the Position Left button is pressed
o
o
o
o
When the Position Right button is pressed
t
Clock
Phase
Flickering and distortion can be eliminated by using the Position Left or Right button to carry
out adjustment.
Note:
(1) The same adjustment details are memorised in both RGB and PC input signal modes for each type of input signal
(frequency).
Helpful Hint ([^Normalisation)
If the N button on the remote control unit is pressed when the Picture Pos./Size display is active, all adjustment
values will be returned to the factory setting level.
21