Picture mode button, Normal, Dynamic – Panasonic TC 42P1F User Manual
Page 23: Note, Picture mode controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PICTURE MODE Controls
J
ii6Sfe||g|iip
1“^ ■ • : ■ ■■ ^ ■
lIZD
l
3
1
PICTURE MODE
PICTURE MODE Button
Operation switches between “Normal” and
"Dynamic” each time the PICTURE MODE
button is pressed.
Normal
Dynamic
Normal
For viewing in norma! (evening lighting)
environments.
This menu selects normal levels of Brightness
and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects a higher than normal levels
of Brightness and Contrast.
Note:
(1) If you would like to change the picture and colour of the selected
Picture Mode to something else, adjust using the "Picture” menu
command in the Menu, (Refer to page 24.)
(2) The setting details are memorised separately for five types of
input signal format (NTSC, PAL, SECAM, 1080i and RGB/PC).
(NTSC Includes 525i and 525p (480p) signals, and PAL includes
625i signals.)
23