Ring count in the tad/fax mode, Options – Panasonic Compact Plain Paper FAX KX-FP270 User Manual
Page 105
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Options
Ring count in the TAD/FAX mode
This feature determines the number of rings before the unit answers a call in the TAD/FAX mode.
You can choose from 1 , 2 , 3 , 4, TOLL SAVER and RINGER OFF.
TOLL SAVER; When you call the unit from a remote location, the number of rings will tell you if there are any
new voice messages. If the unit answers on the second ring, there is at least one new
recorded message. If the unit answers on the fourth ring, there are no new recorded
messages. To save the toll charges for the call, hang up immediately when you hear the third
ring. The third ring indicates that there are no new recorded messages.
RINGER OFF: The unit will answer without ringing.
Helpful hints:
• To answer a call before the unit does, increase the number of rings.
• If you find difficulty in receiving faxes from machines that have an automatic transmission feature, decrease
the number of rings.
1
2
3
4
5
6
7
Select “TAD/FAX” in step 4 of feature setting #77
(see page 73).
Press (ME
n
D).
Display;
Press @, then [ e ] .
1.SYSTEM SET UP
TAD RING COUNT
Press [START/COPY/SETl.
RING:=2
▼ A
Press (5 or ([
a
] to select the desired setting.
Press fSTART/COPY/SET].
SETUP ITEM [
]
Press [MENU].
№
1 %
s -•
CD ^
(O
Note:
• If you subscribe to a Caller ID service, set this ring
count setting to 2 or more rings.
105