Battery strength, Recharge, Settings battery charge – Panasonic PHONE KX-TC1696B User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Settings
Battery Charge
Place the handset on the base unit
and charge for about 4 hours before
initial use.
» The IN USE/CHARGE indicator
lights.
Battery strength
You can check the present battery strength on the display while the
handset is on the base unit, while it is in use (making/answering a call
etc.), or after viewing the Caller List, programming, etc.
The battery strength will remain for 5 seconds after using the handset, then
the display will return to the stand-by mode (see next page).
The battery strength is as shown in the chart below.
Display prompt
Battery strength
{ I I I ]
Fully charged
{ 111
Medium
{ I]
Low
(flashing)
Needs to be charged.
Recharge
Recharge
Recharge the battery when;
— “Recharge”
is displayed,
— “( Bl” flashes on the display, or
— the handset beeps every minute while it is in
use.
o If you DO NOT recharge the handset battery for more than 15 minutes,
the display will keep indicating “Recharge” and/or “ i D ] ” will continue
to flash.
.{ B]
12