Panasonic PHONE KX-TC1696B - Manual (Page 17)

Storing the Second Area Code
You can also program another local area code. This area code does not
require dialing “1” before it. After storing this area code, the display will
show the 10 digits (3-digit area code plus 7-digit phone number) after a call
is received from that area code. Calls will be recorded in the Caller List
without “1".
You cannot store a second area code unless your area code is stored first
(P. 16).
The TALK indicator light must be off before programming.
1
2
3
Press I PROGRAM 1.
<* The TALK indicator flashes.
Press SEARCH 0 (Next key) repeatedly
until “2nd area code ?” is displayed.
Press SEARCH 0 (Yes key).
» The current setting is displayed.
The factory preset is “—”.
» If 3 beeps sound, your area code is not
stored. Store the code first (p. 16), then
start from step 1.
Save AUTO# ?
v=Next A=Yes
2nd area code ?
v=Next A=Yes
2nd area code
Enter area code
® To cancel during programming, press I
EXIT
I. then start from step
1
.
To erase the second area code
Press IF rogram ) >=> SEARCH 0 (Next key) 4 times <=>
SEARCH
0 (Yes key) O I
CLEAR]
=> I
PROGRAM
I (Save key).
Enter a second area code.
2nd area code
o If you enter a wrong number, press
[CLEAR 1, then enter the correct number.
:124
PROGRAM^Save
Press IPROGRAM) (Save kev).
2nd area code
o A long beep sounds and the code is
saved.
• The handset will return to the stand-by
mode.
: 124
17