Panasonic PHONE KX-TC1696B - Manual (Page 41)

NANCY BROWN
1-000-222-3333
--- Waiting----
For Call Waiting Service Users
Press [CALL wait ! if you hear a call-waiting tone while talking.
o The first call is put on hold and you can answer the second call.
« TO return to the first caller, press
ICALL WAIT] again.
• You can also press [FLASH] instead of [CALL WAlTl.
o The call waiting service is not available when the parallel connected
telephone is in use.
• If this function does not operate properly, the flash time (call waiting time)
may not be set correctly. Consult with your telephone company for
details. See page 40 on how to adjust the time.
Visual Call Waiting (Call Waiting ID) Service
Visual Call Waiting (Call Waiting ID) Service allows
your handset to display the second caller’s
information. After you hear a call-waiting tone while __
talking, the handset will display the caller’s name
with the phone number and “--- waiting----
o Please contact your telephone company for details and availability in your
area.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press ITONE] before entering access numbers which require tone dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up,
the mode will return to pulse.
• Access numbers entered after pressing [TONE] will not be included when
redialing.
How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press iREDlAL/PAUSEl if a pause is required for
dialing with a PBX or to access a long distance service.
Ex. Line access number ( 9 ) (PBX)
(D [REDIAL/PAUSEl j^holienumber|
» Pressing [REDIAL/PAUSEl once creates a 3.5 second pause.
This prevents misdialing when you redial or dial a stored number.
• Pressing [REDIAL/PAUSEl more than once increases the length of the
pause between numbers. 41