Document Outline

• (For United States only)
• WARNING:
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
• THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE.
• Avertissement:
  • Pour éviter tout risque d'incendie ou de choc électrique, ne pas soumettre cet appareil à la pluie ou à l'humidité.
  • "La prise secteur devra se trouver à proximité de l'appareil et être facilement accessible."
• OSQDiÔSOû
  • Warnung:
    • Zur Verhütung von Feuer dem und elektrischem Schlag dieses Erzeugnis nicht Regen oder sonstiger Feuchtigkeit aussetzen.
    • Die Steckdose muß nahe bei diesem Gerät angebracht und leicht zugänglich sein.
  • Hinweis:
    • Der arbeitsplatzbezogene Geräuschemissionswert dieses Gerätes beträgt <70 dB{A) nach DIN 45635 Teil 19.
• Notice
  • (For United Kingdom only)
  • How to replace the fuse :
    • Open the fuse conripartment with a screwdriver and replace the fuse.
    • The product should be used only with the power cord that is supplied by the manufacturer.
    • Le produit ne devra être utilisé qu'avec le cordon d'alimentation fourni par le fabricant.
    • Dieses Gerät darf nur mit dem vom Hersteller gelieferten Netzkabel verwendet werden.
• Notice
  • WARNING
  • Avertissement
  • WARNUNG
• 0
• 0
• 0
• 0
• 0
• 0
  • Operating Environment
• 0
• 0
• 0
  • Power Source
  • 1
    • Press the hopper key.
  • 2
    • Set the best hopper position using the hopper key.
    • Press the enter key.
  • 1
    • Press the counter key.
  • 2
  • 3
  • 4
    • Select the desired method using the counter key.
    • Press the enter key.
    • To change the scanner counter to "0", press the enter key.
    • If the scanner counter does not change to "0", press the esc key.
    • Press the imprint key.
  • 2
    • Select the desired printing using the imprint key.
  • 3
    • Press the enter key.
    • Press the menu key.
    • Press the enter key.
    • Setting the SCSI ID
      • When "Set SCSI" is displayed, press the enter key.
      • Use the ▼ key or A key to select the desired setting.
      • Press the enter key.
    • i Setting the terminator
      • ^ Press the menu key until "Termina- I tor" is displayed.
      • Use the ▼ key or ▲ key to select "Enable" or "Disable".
      • Press the enter key.
    • Setting the product ID
  • 2
    • Press the menu key until ID" is displayed.
    • 'Product
    • Use the ▼ key or ▲ key to select the desired unit.
    • Press the enter key.
    • Press the menu key until "Set Counter" is displayed.
  • 2
  • 3
  • 4
  • 5
  • 6
  • 8
    • Setting the daily counter
  • 1
  • 2
  • 3
  • 4
    • Press the menu key until "Daily Counter" is displayed.
    • Press the enter key.
    • Use the ▼ key or "0:00" or "4:00".
    • key to set
    • Press the enter key.
  • 1
  • 2
    • Checking the system counter
      • System
      • Press the menu key until Counter" is displayed.
      • Confirm the scanner counter and press the esc key.
    • Setting the scanning side
  • 1
    • Press the menu key until "Set Scanner" is displayed.
  • 2
    • Press the enter key.
  • 3
    • Use the ▼ key or the A key to select the desired scanning side.
  • 4
    • Press the enter key.
    • Setting other scanning conditions
  • 1
    • Press the menu key until the desired menu is displayed.
    • (See page 17.)
  • 2
    • Use the ▼ key or ▲ key to select the desired condition.
  • 3
    • Press the enter key.
    • Scanning condition settings
    • • Setting the imprint data
  • 1
    • Press the menu key until "Set Imprinter" is displayed.
  • 2
    • Press the enter key.
  • 3
    • Use the ▼ key or the A key to select the desired printing.
    • Press the enter key.
    • Setting the print position
  • 1
    • Press the menu key until "Print Position" is displayed.
  • 2
    • Use the ▼ key or the A key to select the desired print position.
      • Top of the paper
      • 10 mm
      • 124 mm [Approx .1
    • Press the enter key.
    • To clear the clean roller
      • Press the menu key until "Clear Warning" is displayed.
  • 2
    • Press the enter key.
    • Press the enter key.
    • To clear other warnings
  • 1
    • Press the menu key until the desired warning is displayed.
    • Press the enter key.
    • Setting the language
  • 1
    • Press the menu key until Other Param." is displayed.
    • 'Set
  • 2
    • Press the enter key.
  • 3
    • Use the ▼ key or the A key to select "English" or "Japanese".
    • Press the enter key.
    • Setting the buzzer
  • 1
  • 2
    • Setting the date
  • 2
  • 3
  • 5
    • Setting the time
  • 1
  • 2
  • 4
    • Press the enter key.
    • Checking the version
      • Press the menu key until "Version" is displayed.
      • After confirming the entry, press the menu key, then the esc key.
  • 1
  • 2
  • 3
    • Loading a Document
    • Loading a Document
      • Caution :
      • Do not SCAN following types of Documents:
      • Caution for patch sheet
    • Removing paper jams from the scanner
    • Removing paper Jams from the exit tray
    • If the paper cannot be removed by pulling it forward
    • Outside of the unit;
  • 1
    • Turn the power OFF.
  • 2
    • Clean the cover with a soft cloth.
  • 3
    • Remove dirt and dust from the fan exhaust vent with a brush.
    • Inside the scanner:
    • Cleaning the rollers and paper sensors
      • Turn the power off.
  • 1
  • 2
    • front door release.
  • 3
  • 4
  • 5
  • 6
  • 8
  • 9
    • Cleaning the scanning section glass and white reference plate
  • 1
  • 2
    • Note for the roller cleaning paper;
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 5
  • 6
  • 8
    • Please Note:
    • Material Required :
      • Disconnect your scanner frorn the electrical outlet and the SCSI interface cable.
      • Remove the exit tray guides, exit tray stopper, lamp modules (front side and back side) from the scanner.
      • Packing the scanner.
    • Troubleshooting
    • Troubleshooting
      • LCD
      • Possible Cause
      • Remedy
      • ■42
      • Panasonic Document Imaging Company
      • Division of Matsushita Electric Corporation of America
      • Panasonic Canada Inc.
      • Matsushita Electric Industrial Co., Ltd.