Remote commands, Turning on the answering system remoteiy, Skipping the greeting message to ieave a message – Panasonic 5.8 GHZ EXPANDABLE DIGITAL CORDLESS ANSWERING SYSTEM KX-TG6074 User Manual
Page 34: Answering system settings, Remote code, Handset, 1 [menu] —> [0][6][3, Ring count, Answering system remote commands
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Answering System
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Remote command
[1]
Repeat message
(during playback)*''
[2]
Skip message (during
playback)
[4]
Play new messages
[5]
Play all messages
[9]
Stop playback*^
Start voice guidance*'^
[0]
Turn answering system
off
[*][4]
Erase message
currently playing
[*][5]
Erase all messages
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
*2
For English voice guidance only
• To resume operation, enter a
remote command within 15
seconds, or the voice guidance
starts.
*3 For Spanish voice guidance only
Turning on the answering
system remoteiy
If the answering system is off, you can
turn it on remotely.
1 Dial your phone number.
2 Let the phone ring 15 times.
• The unit answers your call with the
greeting message.
• You can hang up, or if you call from
a touch tone phone, you can enter
your remote code and begin
remote operation (page 33).
Skipping the greeting
message to ieave a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press [*] to skip the greeting
message and record your message
after the beep.
Answering system
settings
Remote code
A remote code must be entered when
operating the answering system
remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is “
11”.
Handset
1 [MENU] —> [0][6][3]
2 Enter the desired 2-digit remote
code —> [Save] —> [OFF]
Ring count
You can change the number of times
the phone rings before the unit answers
calls.
The default setting is “
4”.
“Toll saver”:
The unit answers on
the
2nd ring when new messages have
been recorded, and on the 4th ring
when there are no new messages. If
you call your phone from outside to
listen to new messages (page 33). you
will know that there are no new
messages when the phone rings for the