Panasonic RX-ED77 - Manual (Page 10)

The deck corresponding to the lighted
deck indicator (1 or 2) can be operated.
T О О C П П n
I n I L . U U U .
i' j: i
C-RESET-
C-RESET
%
т р а с
t i l l и
П П П
и и LJ _
“3
Listening to Cassettes
Tapes can be played back either deck 1 or deck 2,
Normal, high position and metal tapes can be used.
Press POWER.
(Only when the batteries are used for the poi\-er supply)
Press ■ STOP to select the cassette mode.
CD^TAFE
(The display changes each time the button is pressed.)
Q Press DECK 1 ^ or DECK 2 A, load the tape
and close the lid.
The direction is automatically set to play the top side {is
displayed).
|cl Press ◄ ►.
"FWD" is displayed and play begins. ("REV" is displayed when
play begins while is displayed.)
j^; Tlie side which is facing up is played back.
<3: The reverse side is playback. * •
To stop play:
Press B.
To listen to the other side of the tape:
Press ► during playback.
Pressing M ► automatically turns the unit on, and if a tape is in­
serted, begins play (only when AC power is supplied).
Changin 9 the operation deck
The deck loaded last is automatically selected.
Press DECK 1/2 to select deck 1 or 2. E!
• When one deck is fast forwarding or rewinding and tlie other is
selected and play begun by pressing -4 ►, fast forwarding or
rewinding stops.
• When one deck is playing and the other is selected and a / ►>! or
v/ K4 pressed, play stops.
To reset the tope counter to "000"
(Available only from the remote control)
Press C-RESET. E
Types of tapes which can be played on this unit:
The unit automatically identifies type of tape.
Normal posiHon/TYPE I 0
High position/TYPE II о
Metal position/TYPE IV
о