Panasonic RX-ED77 - Manual (Page 5)

Power Sources
M
VOLTAGE,
SELECTOR
110-
127V
200*
22QV \ 230-
250V
llJ b
110-127V 200-220V 230-250V
ACIN-
Power Cable (Included)
To household^
AC outlet I
operating: un№ on ÀC power
For areas except United Kingdom, Australia and
New Zealand:
Set the voltage. Use a flat-head screwdriver to turn the voltage selec­
tor on the rear to the voltage settmg for the area in ivhich you udll be
using the system. 0
Connect the included AC power cable to the AC IN socket of the unit
and your household AC outlet. E
If the power plug will not fit your socket, use the power plug adaptor
(included) as illustrated, 0
Opéràltînjgtù^^
Install memory batteries first.
Battery installation ond removal 0
Place unit on a soft cloth when installing and removing batteries to
avoid damaging the front panel,
(T) Open the battery cover on the rear panel.
Install batteries in the order indicated in the diagram.
Remove batteries by inserting finger into hole on the bottom of the
unit and pushing out. B
Inner Row
R20/LR20 (D, UM-1)
3 4 5 2
R6/LR6 (AA, UM-3)
0O~rO(n30
© 0Z j ZD 0HIZD ©
Battery life E
When the power/battery check/standby indicator goes off (or dims)
during play, replace all the batteries with new ones.
Mempry bdttiei;pes {iSlot^ ihcluded)
What is memory?
Memory is the information wltich can be programmed into the unit
such as:
•Time
•Timer programmiirg
•CD programming
• Radiostations
If memory batteries are not used, the memory is cancelled at the
following times.
•In electric failures
•When the cable plug is removed from the AC outlet
•When, using batteries as the power source, cable is inserted into the
emit while disconnected from the AC outlet
Battery installation and removal 0
Press the negative end of the number 4 battery to remove batteries.
Replacing batteries
•The service life of these batteries is approximately one year.
To preser\'e the memory contents, connect the power cable to the
household AC outlet before replacing all the memory batteries with
new ones.
•When disconnecting the power cable, first turn the unit off by
pressing POWER.
The service life of the memory back-up batteries is reduced if the
power cable is disconnected from the household AC outlet with the
power still supplied.