Panasonic RX-FT570 - Manual (Page 8)

(continued^
Recording from deck 1 to deck 2 0
When PAUSE and of deck 2 are pressed, tape
editing starts by pressing the deck 1 playback button.
(Synchro-start function)
gSLECTPH
J B li|^ 1 I
Set SELECTOR to “TAPE/
[—• Playback side
Insert the playback tape
into deck 1 and the editing
n -j- ^ tape into deck 2.
Recording side
^ EDmNQ/B,P
J l U - J l
4
5
MiCi'l NaMiAcn woH/ii
II PAUSE
Set EDITING to the desired
position.
"NORMAL”; Normal speed
“HIGH”: High speed
O play
]□
Press PAUSE of deck 2,
then press RECORD
Press PLAY of deck 1.
Editing is started by means
of the Synchro-Start func­
tion.
To stop editing:
Press STOP/EJECT (deck 1 and deck 2).
• Do not change the tape speed during editing. The play­
back sound may flutter. ____
• Be sure to set SELECTOR to “TAPE/SS3” during edit­
ing. Do not change any other position.
• If the unit is brought near a TV set during recording, noise
may be recorded due to the effects of the signals from the
TV set. Maintain a distance of at least 1.5 meters between
the unit and a TV set.
Erasure of tape
To erase a tape without re-recording, use the following pro­
cedure. (Make no connections to [^/LINE IN jacks)
1 Set SELECTOR to f^/LINE.
2 Insert the tape into deck 2 and press RECORD
Recording from external equipment
1
2
Connect the output of the external equipment to
[^/LINE IN jacks (Refer to page 4).
Set SELECTOR to “ICDl/LINE” and Insert the
recording tape into deck 2.
^ Press PAUSE of deck 2, then press RECORD
^ Start playing the external equipment (ex. portable
^ CD player).
Release PAUSE.