This plug is not waterproof—keep dry, Caution w, For united kingdom) – Panasonic SL-PD1010 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Caution W

(For United Kingdom)

(“EB” area code model only)

For your safety, please read the following text carefully.

This appliance Is supplied with a moulded three pin

mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere and
that it is approved by ASIA or BSI to BS1362.
Check for the ASIA mark <$> or the BSI mark ^ on the
body of the fuse.

If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.

A replacement fuse cover can be purchased from your
local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUIT­

ABLE FOR THE SOCKET OUTLET IN YOUR

HOME THEN THE FUSE SHOULD BE RE­
MOVED AND THE PLUG CUT OFF AND DIS­

POSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRI­
CAL SHOCK IF THE CUT OFF PLUG IS IN­
SERTED INTO ANY 13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring

code as shown below.

If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accor­
dance with the following code;
Blue: Neutral, Brown; Live.
As these colours may not correspond with the coloured

markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or col­
oured Black or Blue.
The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or
coloured Brown or Red,

WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL i OR
COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover as follows.

How to replace the fuse

1

. open

the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Advertising