Ètiànging the quality (data compression ratio), Changing the quality (data compression ratio), A / t – Panasonic DMC-F7A User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ètiànging the Quality
(Data Compression Ratio)
2,3
K^-;GlUALiTY
“TiS PICT.SIZE
SENSITIVITY
□
m
SPOT MODE
MONITOR
(a)
©
sT:
S
l
1600X 1200
8
12
800 X 600
24
44
640 X 480
41
66
You can choose among 2 kinds of quality
ieveis (Data Compression Ratio).
[Preparation]
• Set the REC/power switch to [ON], (P16)
1
Press the [MENU] button.
2
Press
A / T
to select [QUALITY].
3
Press ◄/► to select the quality (Data
Compression Ratio).
® sfs : Fine (Low compression)
!t gives priority to picture quality and
record high quality pictures.
» JL : Standard
(Standard compression)
it gives priority to the number of
recordable pictures and record
standard quality pictures.
Quality and number of recordable
pictures
(0 Picture size,
@
Quality) (With
the supplied SMB SD memory card)
4
Press the [MENU] button.
• The menu will disappear.
in motion image mode [[¡III], quality cannot be modified.
It could happen that picture are like a mosaic depending on the scene
characteristics.
The number of recordable pictures corresponds to the capacity of the supplied
SMB SD Memory card. (If you mix fine quality and standard quality, the number of
recordable pictures changes)
Remaining frame which is displayed on the LCD monitor may not correspond with
recorded frames. However, this is not a malfunction.
33