Setting up the power save mode – Panasonic DMC-F7A User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2,3.4
Setting up the Power Save Mode
When setting this mode, the camera, if it is
not operated for certain time, is
automatically turned off.
[Preparation]
Set the REC/power switch to [ON].
1
Press the [MENU] button.
¿i Press A/T to select [SETUP] and
then press ►.
*
The setup menu wiil be displayed.
3
Press
A / T
to select [POWER
SAVE].
4
Press
< / >
to select [ON].
• When the camera is in REC mode
and it is not operated for about 2
minutes, the power save mode is set
and after stiil more about 8 minutes it
is automatically turned off. Moreover,
in playback mode, It is not operated
for about 10 minutes, it is
automatically turned off.
* If selecting [OFF], the power is not
turned off automatically.
5
Press the [MENU] button twice.
• The menu will disappear.
• if you want to cancel the power save mode, press the shutter button halfway or
after setting the REC/power switch to [OFF] set it to [ON] again.
• Do not forget turning the power off in the power save mode.
• Using the AC adaptor, the power save mode is not available.
59