Taking pictures with burst mode, Takina pictures with burst mode, A / t – Panasonic DMC-F7A User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Taking Pictures with Burst Mode
Pressing continuously the shutter button, it
is possible to record in burst mode. (4
frames/second maximum of 5 frames)
[Preparation]
Set the REC/power switch to [ON]. (P16)
Press the [MENU] button.
Press
A / T
to select [BURST].
Press ◄/► to set to [ON].
Press the [MENU] button.
® The menu will disappear.
5
Press the shutter button halfway to
lock the focus, and then press it fully
to take pictures in sequence.
• The flash mode is set to Forced OFF
[ ® ] .
»In motion image mode [[f||]], the burst
mode cannot be used.
• Only the first picture recorded is
displayed on the LCD monitor.
• Since the picture size in the burst mode
is smaller than the single picture mode,
the picture quality may be deteriorated.
41