Panasonic Combinatin VCR AG-513E - Manual (Page 15)

Copy Your Tapes (Dubbing)
Connections you’ll need to make.
Playing (Source) VCR
AUDIO VIDEO
OUT 0-1 ® IN FROM ANT.
IN
O o
® OUT TO TV
Recording (Editing) unit
VIDEO IN AUDIO IN
J’l-T-
1
Playback (Source) Recording (Editing) unit
Insert pre­
recorded tape. Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Select “LINE” mode.
See “Selecting Input Mode” below.
3 Press PLAY then PAUSE at
starting point to put in Standby
mode.
— (Perform operation of steps 4
A Press PLAY to start dubbing.
Press REC, then PAUSE/SLOW
immediately to put in Standby mode.
and 5 on both units simultaneously.)
Press PAUSE/SLOW to start
dubbing.
Press STOP to stop dubbing. Press STOP to stop dubbing.
Selecting Input Mode (TUNERiON only)
Method 1 :
Press INPUT on the unit.
Channel Number *- LINE
Method 2:
Press CH
AT.
The display will change as follows.
1 '
C
(CABLE) (TV)
—►125 or 69
D
Method 3:
a) Press ACTION for MAIN MENU.
b) Press AT^ ► to select “TV," then
press ACTION for SET UP TV screen.
c) Press AT to select “INPUT SELECT," and
then press ► to select “TUNER" or “LINE.”
d) Press ACTION twice to exit this mode.
Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
15