Electrical connection, Wiring accessory – Panasonic Cx-dp88u User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Installation Guide continued
□ Electrical Connection
• This system is be used only in a 12-volt DC battery system (car) with negative ground.
• Follow the wiring connection diagram. Failure to do so may result in damage to the unit.
• First, connect the extension cord О to the CD changer and then, connect the RCA pin connectors and
the extension cord 8p DIN connector to the CD/cassette receiver. Finally, connect the battery lead (yel
low) to a constant power supply.
• Please carefully read the operating and installation instructions of the respective equipment before con
necting it to this unit.
In combination with the cassette receiver (CQ-FX620U)
Wiring Accessory
Description
Q’ty
О
Extension Cord (DIN/BATT/RCA/GND)
1
CD Changer
CX-DP88U
18
CX-DP88U